Generally, the system uses sheets of paper that are automatically placed on top of one another and adhered together using an adhesive. Corresponding Author.

10.

However, it also has other pluses, as well as certain disadvantages, stemming both from the technological process and materials used. LOM – Laminated Object Manufacturing is a lesser known 3D printing technology.Its hallmark is the ability to produce large parts cheaply – LOM 3D printers can use adhesive-laminated paper sheets as raw material.
Laminated Object Manufacturing is far less common than other commercialized additive manufacturing techniques, though it is beginning to gain popularity within the Maker Movement. Mcor Technologies offers a newer form of the process known as Selective Deposition Lamination.

Department of Chemistry, Rice University, 6100 Main Street, Houston, TX, 77005‐1892 USA .

ing [14] or laminated object manufacturing (LOM) [11,12].

Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams.

In this process the materials come in sheet form. The method studied in this paper is Laminated Object Manufacturing (LOM). The main components of the system are a feed mechanism that advances a sheet over a build platform, a heated roller to apply pressure to bond the sheet to the layer below, and a laser to cut the outline of the part in each sheet layer. 5, 91058 Erlangen, Germany . E-mail address: benjamin.dermeik@fau.de.

Laminated object manufacturing is a lesser known additive manufacturing process where an object is created by successively layering sheets of build material, bonding them through heat and pressure and then cutting them into the desired shape using either a blade or a carbon laser.

It is … Duy Xuan Luong. The processes con-sidered are stereolithography (SL), Polyjet, fused deposition modeling (FDM), laminated object manufacturing (LOM), 3D printing (3DP), Prometal, selective laser sintering (SLS), laminated engineered net shaping (LENS), and electron LOM was developed by Helisys of Torrance, CA. Orthotic devices have been widely used not only to provide immobilization, support, correction, or protection, but also to treat musculoskeletal injuries or dysfunctions [1]. Department of Material Science and Nanoengineering, … the process of joining materials to make objects from three-dimensional (3D) models layer by layer as opposed to subtractive methods that remove material. E-mail address: … Laminated object manufacturing (LOM) – This 3D printing technology is not that popular but is one of the most affordable and fastest 3D printing method. The first commercial Laminated Object Manufacturing (LOM) system was shipped in 1991.

Laminated Object Manufacturing (LOM) is a process that combines additive and subtractive techniques to build a part layer by layer.

LOM produces three-dimensional objects with sheets of paper, polymer, metal or a combi-nation thereof [15].

modeling; laminated object manufacturing; selective laser sintering 1.

It can be considered as a hybrid between “subtractive” and “additive” processes: the parts are indeed built up in the layer by layer approach (“additive” processes), Laminated Object Manufacturing: The figure below shows the general arrangement of a Laminated Object Manufacturing (LOM™, registered trademark by Helisys of Torrance, California, USA) cell: Material is usually a paper sheet laminated with adhesive on one …

This technology is used to produce models, prototypes,
Later a diffusion welding process is used join the foils. Sheets of material are bonded together and cut in the right geometry according to the 3D model.

Laminated Object Manufacture (LOM) The Laminated Object Manufacture (LOM) process involves using a CO 2 laser fitted on a 2D plotter to cut the components from thin layers of material. In Conclusion There are quite a few different ways to 3D print a part, with unique advantages and disadvantages to each method. Ajay K. Subramanian. Search for more papers by this author. Additive manufacturing build up parts by adding materials one layer at a time based on a computerized 3D solid model.

review are considered the most relevant in the past, and promising for the future of the industry.

Laminated object manufacturing (LOM) is a rapid prototyping system developed by Helisys Inc. (Cubic Technologies is now the successor organization of Helisys) In it, layers of adhesive-coated paper, plastic, or metal laminates are successively glued together and cut to shape with a knife or laser cutter.

Thirty years into its development, additive manufacturing has become a mainstream manufacturing process.

Benjamin Dermeik. The terms additive manufacturing and 3D printing tend to be used interchangeably to describe the same approach to fabricating parts. The objective is to enhance the mechanical stability towards the properties of the used material. Corresponding Author. The layers are bonded together by pressure and heat application and using a thermal adhesive coating. Department of Materials Science (Glass and Ceramics), University of Erlangen‐Nuremberg, Martensstr. Laminated Object Manufacturing (LOM) is a form of layered manufacturing technology developed by Helisys Inc. The principle: The first LOM fabrication system was developed in 1991 by Helisys company.